pressure compensation unit DAE | 20800

pressure compensation unit DAE

in-stock items

Manuals

ideal for shut-off heating oil pipe sections (e.g. by means of solenoid or non-return valves) which are subject to considerable temperature differences
materials resistant to biofuel and biodiesel mixtures with max. 30 % FAME
watertight up to 10 m water column - ideal for use in flood hazard areas

Used to limit pressure increases in closed pipe sections resulting from expansion caused by temperature changes. Suitable for heating oil pipe sections which are closed at both ends (e.g. by means of solenoid or non-return valves) and which are subject to considerable temperature differences (e.g. due to oil pipe heaters).
Suitable for fuel oil EL (DIN 51603-1), diesel fuel (EN 590), liquid fuels as per DIN SPEC 51603-6 and DIN/TS 51603-8 as well as biofuel and biodiesel with a maximum of 30 % FAME (EN 14214). This product is therefore ideal for all ecologically upgraded fuel oil consuming systems that use the new paraffinic fuels HVO or GTL as an admixture or 100 %. Also for use in flood hazard areas and flood risk areas.

G⅜ female thread connection at both ends. A pipe volume of 725 cm³ can be buffered at a temperature difference of 40 °C. This corresponds to the following max. line lengths (depending on the line diameter):
25.5 m ≥ ⌀ 8 x 1
14 m ≥ ⌀ 10 x 1
9 m ≥ ⌀ 12 x 1
Watertight up to 10 m water column.

Connection

: beidseitig G⅜ IG

Mounting position: any

storage volume: 41.8 cm³

Operating temperature: max. 60 °C

Test pressure: max. 6 bar

approval: Conformity certificate (ÜHP) as per EN 12514

AFRISO_PRESSURE-COMPENSATION-UNIT_ENG_GBR.PDF

pressure compensation unit DAE P31372

datasheet product

Domestic Technology

PDF